Are You On The Verge Of Pouring A Concrete Floor Or Driveway?
In order to ensure that everything ends up perfect, you need to make sure that the concrete is mixed properly. Failing to mix the concrete correctly will decrease its lifespan. It will also increase the likelihood that you experience cracks.
So, how do you mix concrete and what exactly do you need? The process is easier than you might believe. Below, you will learn how to mix concrete correctly. Please seek professional advice for you application.
Tools And Materials Needed
First and foremost, you’ll want to collect all of your supplies. An ordinary individual will usually not have access to a concrete mixer. Instead, you’ll want to use buckets, a wheelbarrow or a mud pan.
Below, you’ll find a list of all of the materials that you’ll need.
- Several buckets
- Mud pan
- Concrete mix
- A particle mask
- Rubber gloves
- A trowel
- A knife or razorblade
Step 1: Opening The Bag
Concrete mix will come in a bag. Bags are available in numerous weights. They can be pretty heavy, so you might need a little assistance lifting them. Either way, you’ll want to start by lifting the bag and placing it in the mixing trough or the wheelbarrow.
Use a knife or razorblade to make a cut across the width of the bag. Grab both ends of the bag and lift upward. This will remove the powder from the bags. Toss the bag in the trash and get it out of the way.
Step 2: Adding Water
Now, you should create an indentation in the dead centre of the concrete. You can do this using a hoe or a trowel. This is the area where you will want to pour the water. Read the instructions on the label. Add two-thirds of the recommended water.
Take your time and pour the water slowly. Now, you’ll need to mix the concrete thoroughly. Use the hoe or trowel to mix the concrete, until the water has been completely absorbed.
Add the rest of the water. Do not add any more. Finish mixing the concrete until its consistency is even.
Step 3: Deal With Dry Pockets
Despite mixing in the recommended amount of water, there is a good chance that you’ll still have dry spots or pockets. Do not add more water. Instead, you should work around the corners and sides of the wheelbarrow or pan.
Allow the concrete on the sides to soak up the excess water in the middle. Continue mixing until the mixture resembles peanut butter or the aggregates are mixed throughout. The dry pockets should be eliminated.
Step 4: Test The Concrete
In order to ensure that the concrete does not crack, you’ll want to test it out before pouring. Put on your rubber gloves and grab a handful of concrete. Give the concrete a good squeeze.
If the concrete has been mixed correctly, it should retain its shape. It should not drip out of your hand. If the concrete drips and slides out of your hand, you will need to add more powder to the mixture.