Understanding The Importance Of Exposed Aggregate Sealers
As you likely already know, sealers are immensely important for any type of concrete. The sealer is capable of protecting the concrete for a long period of time. Exposed aggregate isn’t much different.
If you want to protect your investment, you will most definitely want to add a sealer to your freshly laid exposed aggregate concrete. The importance of sealers is truly bigger than you could ever imagine. Below, you will learn more about the importance of sealers and how to apply them.
Why Use Sealers?
When it comes down to it, exposed aggregate sealers are a necessity. A transparent concrete sealer will make a world of difference. First and foremost, the sealer is capable of improving the appearance and performance of the concrete. On top of that, the sealer will protect the concrete.
It creates a film, which protects the concrete from dusting, stains, abrasions and spalling. It can also protect the exposed aggregate concrete from freeze-thaw damage. If you want to keep your concrete looking amazing for many years to come and want to protect your investment, using a sealer is a must!
Choosing The Right exposed aggregate Sealer
To ensure that your aggregate concrete maintains its longevity and beauty, you’ll need to make sure that you choose the right sealer. Also, the right sealer will make your life immensely easier in the long run. First and foremost, you should choose a sealer that is resistant to the sun’s UV rays. You should also choose one that will not yellow over a period of time.
The sealer should be recotable and it should be capable of repealing grease, water, oil, and stains. Finally, you should choose a high-gloss sealer. This will create a wet look, which helps to intensify and enrich the aggregate’s colours.
Applying The Sealer
If the sealer is not applied correctly, there is a good chance that its effectiveness will be reduced significantly. Before applying the sealer, you’ll want to make sure that the concrete has been cleaned thoroughly. Remove any dirt, debris and stains.
These things will prevent the sealer from adhering to the concrete correctly. If you’re going to be applying the sealer to fresh aggregate concrete, you should first make sure that it has dried completely.
Also, be sure that all cement paste residue has been removed. There are numerous ways to apply the concrete. Using a brush, roller or airless sprayer will be best. Be sure to follow the instructions on the back of the label.
The good news is that exposed aggregate is incredibly rugged. It is capable of maintaining its longevity even when installed in heavy traffic areas. Very little maintenance is needed to keep your exposed aggregate concrete looking amazing.
However, you will need to clean the concrete regularly. You can do so using a mop and water. Or, you can use a pressure cleaner. The latter option is undoubtedly the most convenient. You should also consider resealing the concrete. Just be cautious with the sealer.
If you use too much over a short period of time, it’ll create a cloudy or hazy effect. Certain sealers last for up to 10 years. Others need to be resealed every one to three years.